Actuator modular cu rotatie cu surub cu bila
■ Integral 56 frame, C-face mounting flange.
■ Three-piece flexible coupling for easy motor assembly (included).
■ Four threaded holes in base for standard clevis end accessory attachment. Tapped 1/2-20 UNF-2B.
■ Ball-bearing type screw and mating nut with rolling contact reduces friction to a minimum providing capability for higher speed and longer life with less power requirement.
■ Steel worm and bronze gear set for quiet operation. Available in 5:1 and 20:1 ratios.
■ Rugged, lightweight aluminum housing is corrosion resistant.
■ Standard grease fitting on housing for easy lubrication of worm gear.
■ Stop-disc at end of lifting screw prevents inadvertent run-off of ball nut. 
| Model Number | T Screw Diameter | Turns of Worm 1 in Travel | Torque lb/in at 1000 lb Loads | Motor | 1/4 HP Motor | Rated Load 1/3 HP Motor | Rated Load 1/2 HP Motor | Rated Load 3/4 HP Motor | Lifting Speed in/min | |||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 5:1 Ratio | 20:1 Ratio | 5:1 Ratio | 20:1 Ratio | RPM | 5:1 Ratio | 20:1 Ratio | 5:1 Ratio | 20:1 Ratio | 5:1 Ratio | 20:1 Ratio | 5:1 Ratio | 20:1 Ratio | 5:1 Ratio | 20:1 Ratio | ||
| M-2464 | 1.00 Dia. x 1.000 Lead Ball Screw | 5 | - | 5.3 | - | 1725 | 100 | - | 200 | - | 300 | - | 500 | - | 345 | - |
| M-2464 | 1.00 Dia. x 1.000 Lead Ball Screw | 5 | - | 5.3 | - | 1140 | 200 | - | 300 | - | 500 | - | 700 | - | 228 | - |
| M-2465 | 1.00 Dia. x 0.250 Lead Ball Screw | 20 | 80 | 1.3 | 0.6 | 1725 | 600 | 1500 | 900 | 2000 | 1300 | - | 2000 |
- |
86 |
21 |
| M-2465 | 1.00 Dia. x 0.250 Lead Ball Screw | 20 | 80 | 1.3 | 0.6 | 1140 | 1000 | - | 1300 | - | 2000 | - | - | - | 57 | 14 |
|
Notes: |
||||||||||||||||