Actuator modular cu rotatie cu surub
■ Integral 56 frame, C-face mounting flange.
■ Three-piece flexible coupling for easy motor assembly (included).
■ Four threaded holes in base for standard hydraulic cylinder, clevis end accessory attachment. Tapped 1/2 20 UNF-2B.
■ Rolled thread lifting screw, with work hardened finish, reduces coefficient of friction between screw and lifting nut.
■ Provides smooth, efficient operation and long service.
■ Steel worm and bronze gear set for quiet operation. Available in 5:1 and 20:1 ratios.
■ Rugged, lightweight aluminum housing is corrosion resistant.
■ Bronze lifting nut for longer life.
■ Standard grease fitting on housing for easy lubrication of worm gear.
■ Stop-pin at end of lifting screw prevents inadvertent run-off of lifting nut
Model Number | T Screw Diameter | Turns of Worm 1 in Travel | Torque lb./in. at 1000 lb. Loads | Motor RPM | 1/4 HP Motor | 1/3 HP Motor | 1/2 HP Motor | 3/4 HP Motor | Lifting Speed inch/minute | |||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Ratio | Ratio | Ratio | Ratio | Ratio | Ratio | Ratio | ||||||||||
5:1 | 20:1 | 5:1 | 20:1 | 5:1 | 20:1 | 5:1 | 20:1 | 5:1 | 20:1 | 5:1 | 20:1 | 5:1 | 20:1 | |||
M-2462 | 1.00 Dia. x 1.000 Lead Ball Screw | 5 | - | 5.3 | - | 1725 | 100 | - | 200 | - | 300 | - | 500 | - | 345 | - |
M-2462 | 1.00 Dia. x 1.000 Lead Ball Screw | 5 | - | 5.3 | - | 1140 | 200 | - | 300 | - | 500 | - | 700 | - | 228 | - |
M-2463 | 1.00 Dia. x 0.250 Lead Ball Screw | 20 | 80 | 1.3 | 0.6 | 1725 | 600 | 1500 | 900 | 2000 | 1300 | - | 2000 | - | 86 | 21 |
M-2463 | 1.00 Dia. x 0.250 Lead Ball Screw | 20 | 80 | 1.3 | 0.6 | 1140 | 1000 | - | 1300 | - | 2000 | - | - | - | 57 | 14 |
Notes: |