Actuator modular translatie cu surub cu bila


■ Outer aluminum tube is corrosion-resistant and protects translating tube, lifting screw and nut.
■ Wiper-scraper seal in end of outer tube keeps dirt out and lubricants in.
■ Bronze guide bushing in the outer tube reduces lateral movement of translating tube.
■ Translating tube is zinc coated for weather-resistance.
■ Single or quadruple lead ball-bearing type lifting screw and nut for higher efficiency and longer life.
■ Vented in outer tube to prevent pressure build-up in the actuator
■ Furnished with standard clevis end on translating tube.
■ Threaded end is available on special order, depending on application, any type of threaded connection may be substituted.


Modular 1 4x4 (3).jpg Actuator rotativ DT4 (2).jpg         Modular catalog (2).jpg



Model Number T Screw Diameter Turns of Worm 1 in. Travel Torque lb./in. at 1000 lb. Loads Motor 1/3 HP Motor 1/2 HP Motor 3/4 HP Motor Lifting Speed inch/minute
#   5:1 Ratio 20:1 Ratio 5:1 Ratio 20:1 Ratio RPM 5:1 Ratio 20:1 Ratio 5:1 Ratio 20:1 Ratio 5:1 Ratio 20:1 Ratio 5:1 Ratio 20:1 Ratio
M-2464 0.875 Dia. Acme
0.25 Pitch
RH Double
10 40 39 18 1725 300 700 500 1000 700 1500 170 43
M-2464 0.875 Dia. Acme
0.25 Pitch
RH Double
10 40 39 18 1140 450 1000 700 1500 1100 2000 114 28
M-2465 1.0 Dia. Acme
0.25 Pitch
RH Single
20 80 29 14 1725 400 900 600 1400 900 2000 86 21
M-2465 1.0 Dia. Acme
0.25 Pitch
RH Single
20 80 29 14 1140 600 1400 900 2000 1400 2000 57 14

Notes:
1. Model M-2464 is self lowering and a motor brake should be used.
2. Model M-2465 may drift 0.75 in (20:1 ratio) to 2.0 in (5:1 ratio) when motor is shut off. If this is undesirable, a motor brake should be employed.
3. When ordering other than 56C-face actuators contact applications engineering at 800-477-5002.